Products

AC400 Microwave Ultra Cleaner


What Acid Ultra Cleaner Does?

Clean labware is essential for trace metal analysis.

Traditional cleaning procedures of labware with nitric acid such as acid soaking and microwave digestion blank cleaning can betime consuming and yield less-than-ideal results. We are pleased to offer today's lab technician a better solution.

The acid cleaner is also known as Acid Steam Cleaning System or Trace Cleaning System. It uses acid vapor to clean the vessels in a sealed chamber. Through a built-in temperature-control heating system, all trace metal contaminants that are soluble in acid can be safely and efficiently removed by acid vapor. The used acid will then be drained from the chamber to prevent the extracted contaminants from being reintroduced to the cleaned vessels.

Game Changing in Speed

In 2015, Amerlab set the bar for labware cleaning with the AC100 Auto Cleaner which offered a unique three-in-one unit capable of automated acid cleaning, rinsing and drying. This innovation offered new levels of efficiency and quality control and was highly praised by the market.

In 2017, Amerlab launched the AC100 upgraded model AC200, which combines our traditional advantages and many innovative features, and has been highly praised by the market.

In 2020, Amerlab is pleased to offer the AC300 which not only further optimized the acid steam cleaning function, but also added acid purification options. AC300 can automatically purify the waste acid after cleaning and perfectly recycle the acids.

At the same time that AC300 was launched, Amerlab introduced the world's only microwave ultra cleaner AC400, which made up for the shortcomings of the conventional acid steam cleaner. AC400 completes the cleaning and drying process as fast as 2 hours, which greatly improved the work efficiency. It meets the demand from high-throughput laboratories.


Cleaning Processes

Pre-cleaning:
Uses ultra-pure water steam for initial rinsing, which can remove most contaminants on the surface and save subsequent cleaning time and acid consumption.

Acid vapor cleaning:
The acid liquid gently evaporates into ultra-pure acid steam under sub-boiling condition. It can be used to clean inner and outer surfaces of vessels. Upon finishing, the remaining acid will be drained from the system automatically.

Ultra-pure water rinsing:
Ultra-pure water is introduced to the system and evaporates into steam to further decontaminate the inner and outer surfaces of vessels. Upon finishing, the residual water will be drained from the system automatically.

Hot air drying:
After passing twice through HEPA filtration, air travels into the heating chamber to be heated rapidly before entering the cleaning chamber to dry the rinsed vessels.


Waste Removal via Vacuum

Leak proof

Non-contact removal of the high-temperature waste safely prevents damage to the pump Eliminates 1-2 hour wait for waste cooling Patent pending

One-Way Vapor Technology(OWV)

No secondary contamination from the waste acid

The level sensors monitor the real-time level of pure acid, pure water, waste acid, and waste water. Once the low level of pure acid or water is detected, the cleaner will remind you to refill it before starting to prevent inadequate cleaning. Once the high level of waste is detected, the cleaner will not allow you to start the cleaning to avoid overflow.

Made of PTFE

More durable, More versatile

All wetted parts are made of durable, acid resistant PTFE material.
PTFE, also known as Teflon, can resist concentrated acids including HF and aqua regia. There is no quartz containing ppm-level metal elements that is unable to resist hydrofluoric acid (HF). Digestion often involves HF.
No dead corners & Never crack The cleaning chamber is an integrated unibody which will withstand many decades of simultaneous hot acid and high temperature. In contrast models made with multiple pieces are vulnerable to cracking, dead corners and accumulated dirt.

Automatic Acid Dilution

No chemical hazard

The dangerous concentrated acid can be automatically diluted to any desired concentration

Zero human contact with the acid

Patent pending

Real-time level monitoring

No inadequate cleaning or overflow

The level sensors monitor the real-time level of pure acid, pure water, waste acid, and waste water.
Once the low level of pure acid or water is detected, the cleaner will remind you to refill it before starting to prevent inadequate cleaning. Once the high level of waste is detected, the cleaner will not allow you to start the cleaning to avoid overflow.

Acid Vapor Scrubber

No hood needed

Traditionally, both the cleaning chamber and the waste bottle required an air vent to maintain air pressure balance, resulting in inevitable acid vapor leakage. AC400 uses a unique high-performance acid vapor scrubber which eliminates this problem - yielding an absorbing efficiency over 99% and an adsorbing capacity of 50%. Patent pending.

ALL NEW Acid Vapor Scrubber

In response to the risk of a room full of toxic fumes, the AC400 is equipped with Amerlab's proprietary acid vapor scrubber. The acid vapor is condensed, collected, neutralized, online pH monitored and alkaline sorbent neutralized before being discharged. With this device, the AC400 does not need a fume hood.

Amerlab has the best solutions for your scientific cleaning needs.
Amerlab invented the hollow steam pipe which is able to guide steam to the maximum levels. The steam sprays the inner surface of the vessel through the jet holes around the post. This greatly improves the cleaning efficiency.
In contrast, the traditional solid support rod is unable to guide any steam. Furthermore, it even blocks the steam’s pathway.

General Cleaning Racks

Suitable for any vessel with ID > 15 mm
Microwave Digestion Liners
Hot Block Digestion Tubes
Centrifuge Tubes
Top Tray for Stoppers or Caps

General Cleaning Racks

Suitable for 77 x thinner tubes with ID>10mm
15mL Centrifuge Tubes
15mL Hot Block Digestion Tubes
15mL UltraWave Digestion Tubes (Quartz or PTFE)

General Cleaning Racks

10 x 50 mL + 60 x 15 mL
Quartz or PTFE Tubes
Top Tray for Stoppers or Caps

Volumetric Flask Cleaning Rack

Suitable for High Throughput Labs
14 x 25 or 50mL, or less 10 x 100mL
Up to 14 volumetric flasks

Pipette Tips cleaning rack

16 x 0.2 mL + 22 x 1 mL + 15 x 5 mL .......
Customizable

Intuitive and powerful software

Everything starts with one click

It includes a graphical display and a 10-inch color touch screen. All settings are automatically saved and restored. The temperature sensor and liquid level sensors can be calibrated by the users.


Lablink

Mumbai Head Office :
10,11 Pitre Compound, Mangaon, Manpada, Kalyan-Shilphata Road, Dombivli (E), Dist. Thane - 421204, Mumbai, Maharashtra, India.

Mobile No:+91 9821604036 / 7045580460
E-Mail : [email protected]

Vadodara Branch :
B/24, Ground Floor, Shiva Shiv Tenament, T.P. 13 Near Anjali Park, Soc. Chhani Jakat Naka Vadodara, Chhani Road Vadodara – 390024.

Mobile:+91 08758676534

Bangalore Branch :
Elegancy Apartment, Flat No-402, 2nd Cross, R.K. Township, Yarandahalli, Bommasandra-Jigni Link Road, Bangalore – 560099, India.

Mobile:+91 9743160641

Hyderabad Branch :
G-6 Sapthagiri Apartment, Phase 2, Padmarao Nagar, Secundrabad – 500025, India.

Mobile:+91 9743160641

Follow Us

© Copyright 2018 All Rights Reserved Lablink